• Image of Standard Guy Manuel LED DIY/Completed Kit
  • Image of Standard Guy Manuel LED DIY/Completed Kit
  • Image of Standard Guy Manuel LED DIY/Completed Kit

Guy Manuel LED kit - Standard
This is the kit for the LED sidebars and chins of the Guy Manuel Helmet. Once completed this kit boasts 8 color sidebars per side along with the appropriate chin boards. 136 total LEDs. There are 14 different LED patterns programmed in, each selectable by the press of a switch. This LED kit fits Moguai Props, Volpin, Firewire, and many other helmet casts.
Assembly Tutorial

Can be purchased assembled! See options.

Please note that there are No Returns!

Parts Included:
16 x Sidebar boards
1 x Right Chin Piece
1 x Left Chin Piece
1 x Main Control Board
1 x Chin Color Filters

Parts Required:
200 x 5mm Strawhat LEDs
5 x 10uF Capacitors (10, 16, 25 or 50 Volts)
5 x 0.1uF Capacitors (10, 16, 25 or 50 Volts)
6 x 22pF Capacitors (10, 16, 25 or 50 Volts)
2 x 40 Pin 2.54mm Right Angle Headers
20 x 1k Ohm Resistors (1/4 or 1/8 Watt)
6 x 47k Ohm Resistors (1/4 or 1/8 Watt)
20 x 2n3904 NPN Transistors
3 x 16Mhz Crystals
200 x 2.54mm Crimp Connectors
16 x 2.54mm Crimp Housings (single pin)
20 x 2.54mm Crimp Housings (3 pin)
2 x 6mm Momentary Pushbuttons
3 x Max7219 Matrix Drivers
3ft 25 Conductor 28AWG flat Cable
10Ft CAT 5 Ethernet Cable
1 x 4 AA Battery Holder
1 x 3 C-Cell Battery Holder
8 x Different Color Light Filters/Color Gels

Solder
Electrical Tape

Tools Required:
• A soldering Iron (~30 Watts)
• Hot Glue Gun
• Wire Cutters
• Scissors
• Wire Strippers
• D-Sub Crimping tool

Wiring Diagram:
Here

If purchasing the assembled kit w/sidebars housings, please specify what design you need and what color of plastic you want, white/black. Link to PDF with Sidebar Housing Designs
FAQ:
Do I have to purchase additional parts to complete this kit?
Yes, check the Parts Required list above.

Where can I purchase the Required parts?
One of the options is to get the kit with the required parts.

Do I have to be able to write code to assemble this kit?
Nope, the kit comes with a pre-programmed chip.

What skills are required to complete the kit?
Being able to solder is a MUST! Everything else is more-or-less straightforward.

Does the kit come with a helmet?
Nope, the kit comes with only the electronics.

Does this kit come assembled?
I do offer an assembled RGB kit, please check my other listings.

How difficult is it to assemble?
On a scale of 1-to-10, around 5.

Is there a way I can buy the kit assembled?
Yes, select the 'Assembled' Option Below.

Do you ship world-wide?
Yes, I do.

How long does International Shipping take?
Roughly 1-3 weeks.