• Image of Thomas + Guy Kits + Upgrades

Update as of 9/15/2021:
The Thomas Upgrade kit is out of stock at the moment, it will be back by 10/10/2021.
If you place an order, all available kits will be shipped, and the Upgrade kit shipped afterwards.

So you want all the Daft Punk Kits? (not including the Guy Matrix)
Well here you go!

You get 4 kits:
Thomas Standard (V3)
Thomas Upgrade (V2)
Guy Man Standard
Guy Man Upgrade (V2)

The Guy Man Matrix Kit is NOT included in this bundle.

The kits are exactly the same at the individual kits listed here, just grouped into a value package.

Thomas Standard Instructions/parts:
http://alexplusleds.bigcartel.com/product/do-it-yourself-led-kits

Thomas Upgrade Instructions/parts:
http://alexplusleds.bigcartel.com/product/thomas-sidebars-ear-upgrade-kit

Guy Man Standard Instructions/parts:
http://alexplusleds.bigcartel.com/product/standard-guy-manuel-led-kit

Guy Man Upgrade (V2) Instructions/parts:
https://www.youtube.com/playlist?list=PLUPm9fUnSFYzvwoWpY0K8PGpcPzhVolaV

Read the FAQs in each of the kits before ordering to know what to expect.

*Helmets not included. Parts kits are ONLY included in the 'With Parts Kits Option'.

If you purchase the "Without Parts Kits" you will need the following parts:

300 x 5mm Strawhat LEDs
25 x 10uF Capacitors (10, 16, 25 or 50 Volts)
25 x 0.1uF Capacitors (10, 16, 25 or 50 Volts)
2 x 40 Pin 2.54mm Right Angle Headers
30 x 1k Ohm Resistors (1/4 or 1/8 Watt)
10 x 47k Ohm Resistors (1/4 or 1/8 Watt)
20 x 2n3904 NPN Transistors
200 x 2.54mm Crimp Connectors
16 x 2.54mm Crimp Housings (single pin)
20 x 2.54mm Crimp Housings (3 pin)
15 x 6mm Momentary Pushbuttons
10 x Max7219 Matrix Drivers
8 Feet 50 Conductor Flat Cable
15Ft CAT 5 Ethernet Cable
2 x 4AA battery pack w/switch
1 x 3 C-Cell Battery Holder
180 x 2x5x7mm White Rectangular LEDs
40 x 330 Ohm Resistors (1/4 or 1/8 Watt)
2 x 5mm Green LEDs, diffused
2 x 5mm Red LEDs, diffused
3 x Red LED, Clear Lens
3 x Green LED, Clear Lens
3 x Blue LED, Clear Lens
3 x Orange LED, Clear Lens
3 x Pink LED, Clear Lens
3 x Yellow LED, Clear Lens
10 x 5mm White LEDs, Diffused
6 x 27k or 30k Ohm resistors (1/4 or 1/8 Watt)
300 x 5mm Red LEDs
1 x 4 pin female header
1 x Uart Bluetooth Module HC-06 Slave